Installation Guide

1. Carbon Fiber Steering Wheel Installation

Tools Needed:

  • Screwdrivers
  • Wire cutters and strippers
  • Multimeter (for testing wires)
  • Electrical tape or heat shrink tubing
  • Optional: Add-A-Fuse kit

Steps:

Safety First:

  • Turn Off the Car & Disconnect the Battery: This prevents electrical hazards.

Remove the Old Steering Wheel:

  1. Access: Unscrew bolts or screws behind the wheel.
  2. Detach: Unhook the airbag and any connected wires.
  3. Remove: Use a steering wheel puller if necessary.

Install Your New EuroGear Steering Wheel:

  1. Align: Position the new wheel with the steering column.
  2. Connect: Hook up LED wires and other controls.
  3. Secure: Fasten the wheel firmly with the central bolt.

Wiring for LED Lights:

  1. Power Source: Use a multimeter to locate a suitable connection.
  2. Connect: Attach LED wires to power and a ground point.
  3. Add-A-Fuse: Optional for a clean installation.

Testing:

  1. Reconnect Battery: Restore power to the vehicle.
  2. Function Check: Ensure the steering wheel and LEDs are operational.
  3. Secure Wires: Confirm there are no loose connections.

2. Carbon Fiber Airbag Cover Installation

Steps:

Access the Airbag Module:

  1. Remove Retention Mechanisms: Locate and remove screws or clips holding the airbag.
  2. Extract Module: Carefully pull out the airbag.
  3. Disconnect: Unhook all electrical connectors.

Install the New EuroGear Airbag Cover:

  1. Remove Old Cover: Detach and set aside the existing cover.
  2. Fit New Cover: Securely snap or screw the new cover into place.

Reassemble Airbag:

  1. Reconnect Wires: Reconnect all electrical connectors.
  2. Secure Airbag: Reinstall the airbag into the steering wheel.

System Check:

  1. Reconnect Battery: Reattach the negative terminal.
  2. Test: Start the car and verify the airbag light behaves correctly.

3. Carbon Fiber Paddle Shifters Installation

Steps:

Prepare:

  1. Ensure Stability: Park in a safe, stable location.
  2. Battery Off: Disconnect the battery to avoid electrical issues.

Remove Existing Shifters:

  1. Uncover: Use a trim tool to remove any panels covering the paddles.
  2. Detach: Unscrew or unclip the old paddle shifters.

Install EuroGear Paddles:

  1. Align: Position the new paddles in the same location as the old ones.
  2. Secure: Fasten them with the provided screws or clips.

Finalize Installation:

  1. Reassemble Panels: Replace any panels that were removed.
  2. Reconnect Battery: Restore power to the vehicle.
  3. Test: Verify paddle response by starting the car and engaging the paddles.

Final Checks:

  1. Double-check all installations: Ensure everything is secure.
  2. Test all functions: Confirm proper operation before regular use.

This comprehensive guide ensures a smooth and safe upgrade with premium EuroGear products, enhancing both the aesthetics and functionality of your vehicle’s interior.